Bike Specs

Kawasaki Eliminator 500 (Euro 5+) (2024) — Specs

Kawasaki Eliminator 500 (Euro 5+)

Identity

Manufacturer: Kawasaki
Model: Eliminator 500 (Euro 5+)
Category: Motorcycle
Type: Motorcycle
Years: 2024 →

Engine

Displacement (cc): 451
Cylinders: 2
Power (hp): 45
Power (kW): 33
Torque (Nm): 32

Dimensions

Dimensions
Overall length: 2250 mm
Overall width: 785 mm
Overall height: 1100 mm
Wheelbase: 1520 mm
Ground clearance: 150 mm
Weight (kg): 176
Seat height (mm): 735
Tank (L): 13

Tires

Front tire: 120/70-18
Rear tire: 150/80-16
Front pressure (bar): 2
Rear pressure (bar): 2.3

Drivetrain

Sprockets (front / rear): 14 / 43

Ignition

Spark plug: NGK LMAR9G
Plug gap: 0.7-0.8 mm

Fluids & Filters

Engine oil: SAE10W-40, API SG
Engine oil (with filter, L): 2
Engine oil (without filter, L): 1.6
Oil filter: Hiflofiltro HF303
Air filter: Hiflofiltro HFA2504
Coolant (L): 1.3
Brake fluid: DOT 4

Fuel consumption

Estimated: 3.5 L/100 km
Estimated range: ~371 km on a full tank (13.0 L)
Note: real-world ±15-30% depending on riding style

Service

Battery: OEM battery specification
Service interval (km): 10000
Service interval (months): 12
Valve check (km): 24000

Parts and consumables for this motorcycle

Data is gathered with care, but without guarantee. Always confirm critical information with your dealer or workshop.

Service notes

Service interval: every 10,000 km or 12 months, whichever comes first. Valve clearance check every 24,000 km. Engine oil: oil grade SAE10W-40, API SG, 2 L with filter change, 1.6 L without filter change. Spark plug: NGK LMAR9G (gap 0.7-0.8 mm). Brake fluid: DOT 4. Coolant capacity: 1.3 L. Sprockets: 14/43 teeth. Tire pressure: front 2 bar, rear 2.3 bar (cold). Tire size: front 120/70-18, rear 150/80-16. Always confirm critical values with the workshop manual or an authorised dealer.

OEM and quality aftermarket parts that fit this bike. Always confirm with your dealer before ordering.

Engine oil
Spec: SAE10W-40, API SG, 2.0 L (with filter), 1.6 L (without filter)
  • OEM OEM recommended engine oil (SAE 10W-40)
  • Premium Motul 7100 4T (100% Synthetic, Ester)
  • Premium Motul 5100 4T Technosynthese (Semi-Synthetic)
Which Motul for this bike?
Motul 7100 4T ✓Motul 5100 4T
ProductMotul 7100 4T — 100% fully syntheticMotul 5100 4T — semi-synthetic
Best forSport, Naked, Adventure (600cc+), trackStandard, Cruiser, Scooter, daily use
RPM protectionExcellent — ester base, stable under loadGood — for normal riding conditions
  • Standard Repsol Moto Racing 4T (Synthetic)
  • Standard Elf Moto 4 Tech (Semi-Synthetic)
Fully Synthetic vs Semi-Synthetic
Fully SyntheticSemi-Synthetic
Base oil100% chemical synthesis (ester or PAO)Mineral oil + synthetic additives
Heat resistanceExcellent — stable at extreme heat & RPMGood — suitable for normal temperatures
Cold startBetter — reaches engine faster when coldGood — adequate for normal climates
Change intervalLonger (up to 10,000 km)Shorter (5,000–7,000 km typical)
PriceHigherLower
Oil filter
Spec: Hiflofiltro HF303
  • Premium Hiflofiltro HF303
  • Premium K&N KN-303
Air filter
Spec: Hiflofiltro HFA2504
  • Standard Hiflofiltro HFA2504
Spark plug
Spec: NGK LMAR9G, gap 0.7-0.8 mm
  • OEM NGK LMAR9G
  • Premium NGK LMAR9GIX
  • Standard NGK LMAR9G
Front brake pads
Spec: EBC FA132
  • Premium EBC FA132
Rear brake pads
Spec: EBC FA132
  • Premium EBC FA132
Drive chain
Spec: Sprockets 14/43 teeth
Front tire
Spec: 120/70-18, 2.0 bar
  • OEM OEM 120/70-18
Rear tire
Spec: 150/80-16, 2.3 bar
  • OEM OEM 150/80-16
Battery
  • Premium Yuasa FTX9-BS
Brake fluid
Spec: DOT 4
  • Standard TotalEnergies HBF4
Coolant
Spec: 1.30 L coolant capacity
Service interval
Spec: 10 000 km / 12 months
  • OEM Engine oil + oil filter change
  • OEM Air filter inspection
  • OEM Spark plug check
  • OEM Brake fluid replacement: every 2 years
Valve check
Spec: 24 000 km
Suspension
Spec: 41 mm telescopic fork
  • OEM Fork: 41 mm telescopic fork