Bike Specs

Yamaha TRICITY 125 (MW 125) (2014–2016) — Specs

Yamaha TRICITY 125 (MW 125)

Identity

Manufacturer: Yamaha
Model: TRICITY 125 (MW 125)
Category: 3-wheeler
Type: 3-wheeler
Years: 2014 → 2016

Engine

Displacement (cc): 125
Cylinders: 1
Power (hp): 11
Power (kW): 8
Torque (Nm): 10.3

Dimensions

Dimensions
Overall length: 1950 mm
Overall width: 720 mm
Overall height: 1110 mm
Wheelbase: 1340 mm
Ground clearance: 150 mm
Weight (kg): 152
Seat height (mm): 780
Tank (L): 6.6

Tires

Front tire: 90/80-14
Rear tire: 110/90-12
Front pressure (bar): 1.75
Rear pressure (bar): 2.25

Ignition

Spark plug: NGK CR7E
Plug gap: 0.7-0.8 mm

Fluids & Filters

Engine oil: SAE10W-40, API SG
Engine oil (with filter, L): 0.8
Oil filter: OEM oil filter
Air filter: OEM air filter
Brake fluid: DOT 4

Fuel consumption

Estimated range: ~219 km on a full tank (6.6 L)

Service

Battery: OEM battery specification
Service interval (km): 6000
Service interval (months): 12
Valve check (km): 12000

Parts and consumables for this motorcycle

Data is gathered with care, but without guarantee. Always confirm critical information with your dealer or workshop.

Service notes

Service interval: every 6,000 km or 12 months, whichever comes first. Valve clearance check every 12,000 km. Valve clearance — intake cold 0.08-0.12 mm, exhaust cold 0.16-0.20 mm. Engine oil: oil grade SAE10W-40, API SG, 0.8 L with filter change. Spark plug: NGK CR7E (gap 0.7-0.8 mm). Brake fluid: DOT 4. Tire pressure: front 1.75 bar, rear 2.25 bar (cold). Tire size: front 90/80-14, rear 110/90-12. Always confirm critical values with the workshop manual or an authorised dealer.

OEM and quality aftermarket parts that fit this bike. Always confirm with your dealer before ordering.

Engine oil
Spec: SAE10W-40, API SG, 0.8 L (with filter)
  • OEM OEM recommended engine oil (SAE 10W-40)
  • Premium Motul 7100 4T (100% Synthetic, Ester)
  • Premium Motul 5100 4T Technosynthese (Semi-Synthetic)
Which Motul for this bike?
Motul 7100 4T ✓Motul 5100 4T
ProductMotul 7100 4T — 100% fully syntheticMotul 5100 4T — semi-synthetic
Best forSport, Naked, Adventure (600cc+), trackStandard, Cruiser, Scooter, daily use
RPM protectionExcellent — ester base, stable under loadGood — for normal riding conditions
  • Standard Repsol Moto Racing 4T (Synthetic)
  • Standard Elf Moto 4 Tech (Semi-Synthetic)
Fully Synthetic vs Semi-Synthetic
Fully SyntheticSemi-Synthetic
Base oil100% chemical synthesis (ester or PAO)Mineral oil + synthetic additives
Heat resistanceExcellent — stable at extreme heat & RPMGood — suitable for normal temperatures
Cold startBetter — reaches engine faster when coldGood — adequate for normal climates
Change intervalLonger (up to 10,000 km)Shorter (5,000–7,000 km typical)
PriceHigherLower
Oil filter
Air filter
Spark plug
Spec: NGK CR7E, gap 0.7-0.8 mm
  • OEM NGK CR7E
  • Premium NGK CR7EIX
  • Standard NGK CR7E
Front brake pads
Spec: EBC FA134
  • Premium EBC FA134
Rear brake pads
Spec: EBC FA134
  • Premium EBC FA134
Front tire
Spec: 90/80-14, 1.75 bar
  • OEM OEM 90/80-14
Rear tire
Spec: 110/90-12, 2.25 bar
  • OEM OEM 110/90-12
Battery
  • Premium Yuasa YTX7L-BS or YTX7A-BS (typical 125-250cc)
Brake fluid
Spec: DOT 4
  • Standard TotalEnergies HBF4
Coolant
Service interval
Spec: 6 000 km / 12 months
  • OEM Engine oil + oil filter change
  • OEM Air filter inspection
  • OEM Spark plug check
  • OEM Brake fluid replacement: every 2 years
Valve check
Spec: 12 000 km
  • OEM Intake clearance: cold 0.08-0.12 mm
  • OEM Exhaust clearance: cold 0.16-0.20 mm
Suspension
Spec: SAE 10W
  • OEM Fork oil grade: SAE 10W
Drive chain