Husaberg FE 450 E (2004–2008) — Specs
Identity
Manufacturer: Husaberg
Model: FE 450 E
Category: Motorcycle
Type: Motorcycle
Years: 2004 → 2008
Engine
Displacement (cc): 449
Cylinders: 1
Power (hp): 50
Power (kW): 37
Torque (Nm): 47
Dimensions
Overall length: 2100 mm
Overall width: 790 mm
Overall height: 1140 mm
Wheelbase: 1430 mm
Ground clearance: 160 mm
Weight (kg): 109
Seat height (mm): 930
Tank (L): 9
Tires
Front tire: 90/90-21
Rear tire: 140/80-18
Front pressure (bar): 1.5
Rear pressure (bar): 2
Drivetrain
Drive chain: 520 chain
Sprockets (front / rear): 14 / 48
Ignition
Spark plug: NGK DCPR8E
Plug gap: 0.6 mm
Fluids & Filters
Engine oil: SAE10W-50
Engine oil (with filter, L): 1
Oil filter: Hiflofiltro HF655
Coolant (L): 1
Brake fluid: DOT 4
Fuel consumption
Estimated range: ~225 km on a full tank (9.0 L)
Service
Service interval (km): 6000
Service interval (months): 12
Valve check (km): 12000
Parts and consumables for this motorcycle
Data is gathered with care, but without guarantee. Always confirm critical information with your dealer or workshop.
Service notes
Service interval: every 6,000 km or 12 months, whichever comes first. Valve clearance check every 12,000 km. Valve clearance — intake 0.12 mm cold, exhaust 0.12 mm cold. Engine oil: oil grade SAE10W-50, 1 L with filter change. Spark plug: NGK DCPR8E (gap 0.6 mm). Brake fluid: DOT 4. Coolant capacity: 1 L. Chain: chain, sprockets 14/48 teeth. Tire pressure: front 1.5 bar, rear 2 bar (cold). Tire size: front 90/90-21, rear 140/80-18. Always confirm critical values with the workshop manual or an authorised dealer.
OEM and quality aftermarket parts that fit this bike. Always confirm with your dealer before ordering.
Engine oil
Spec: SAE10W-50, 1.0 L (with filter)
- OEM OEM recommended engine oil (SAE 10W-50)
- Premium Motul 7100 4T (100% Synthetic, Ester)
Fully Synthetic vs Semi-Synthetic
| Fully Synthetic | Semi-Synthetic | |
|---|---|---|
| Base oil | 100% chemical synthesis (ester or PAO) | Mineral oil + synthetic additives |
| Heat resistance | Excellent — stable at extreme heat & RPM | Good — suitable for normal temperatures |
| Cold start | Better — reaches engine faster when cold | Good — adequate for normal climates |
| Change interval | Longer (up to 10,000 km) | Shorter (5,000–7,000 km typical) |
| Price | Higher | Lower |
Oil filter
Spec: Hiflofiltro HF655
- Premium Hiflofiltro HF655
Spark plug
Spec: NGK DCPR8E, gap 0.6 mm
- OEM NGK DCPR8E
- Premium NGK DCPR8EIX
Front brake pads
Rear brake pads
Front tire
Spec: 90/90-21, 1.5 bar
- OEM OEM 90/90-21
Rear tire
Spec: 140/80-18, 2.0 bar
- OEM OEM 140/80-18
Brake fluid
Spec: DOT 4
Coolant
Spec: 1.00 L coolant capacity
Service interval
Spec: 6 000 km / 12 months
- OEM Engine oil + oil filter change
- OEM Air filter inspection
- OEM Spark plug check
- OEM Brake fluid replacement: every 2 years
Valve check
Spec: 12 000 km
- OEM Intake clearance: 0.12 mm cold
- OEM Exhaust clearance: 0.12 mm cold
Suspension
Spec: 48 mm USD fork / SAE 5W
- OEM Fork: 48 mm USD fork
- OEM Fork oil grade: SAE 5W
Air filter
Drive chain
Battery
- Premium Yuasa YTX9-BS or YTZ7S (typical 250-500cc)
