Bike Specs

Suzuki GT 185 (1976–1978) — Specs

Suzuki GT 185

Identity

Manufacturer: Suzuki
Model: GT 185
Category: Motorcycle
Type: Motorcycle
Years: 1976 → 1978

Engine

Displacement (cc): 184
Cylinders: 2
Power (hp): 17
Power (kW): 13

Dimensions

Dimensions
Overall length: 1950 mm
Overall width: 720 mm
Overall height: 1110 mm
Wheelbase: 1340 mm
Ground clearance: 150 mm
Weight (kg): 131
Tank (L): 10

Tires

Front pressure (bar): 1.7
Rear pressure (bar): 2

Drivetrain

Drive chain: 428 chain, 102 links
Sprockets (front / rear): 14 / 40

Ignition

Spark plug: NGK B7HS
Plug gap: 0.7 mm

Fluids & Filters

Air filter: OEM air filter
Brake fluid: DOT 4

Fuel consumption

Estimated fuel consumption: ~3.0 L/100 km
Estimated range: ~333 km on a full tank (10.0 L)
Note: estimate based on engine size + bike type. Real-world ±20%.

Service

Battery: OEM battery specification
Service interval (km): 3000
Service interval (months): 12

Parts and consumables for this motorcycle

Data is gathered with care, but without guarantee. Always confirm critical information with your dealer or workshop.

Service notes

Service interval: every 3,000 km or 12 months, whichever comes first. Engine oil: 1.2 L with filter change. Spark plug: NGK B7HS (gap 0.7 mm). Brake fluid: DOT 4. Chain: 102 links, sprockets 14/40 teeth. Tire pressure: front 1.7 bar, rear 2 bar (cold). Always confirm critical values with the workshop manual or an authorised dealer.

OEM and quality aftermarket parts that fit this bike. Always confirm with your dealer before ordering.

Engine oil
Spec: 2-stroke autolube (JASO FC), separate mix-oil reservoir
  • OEM OEM 2-stroke oil (JASO FC/FD)
  • Premium Motul 710 2T (100% Synthetic)
  • Premium Motul 510 2T Technosynthese (Semi-Synthetic)
  • Standard Repsol Moto Sintetico 2T (Synthetic)
  • Standard Elf Moto 2 Tech (Semi-Synthetic)
Fully Synthetic vs Semi-Synthetic
Fully SyntheticSemi-Synthetic
Base oil100% chemical synthesis (ester or PAO)Mineral oil + synthetic additives
Heat resistanceExcellent — stable at extreme heat & RPMGood — suitable for normal temperatures
Cold startBetter — reaches engine faster when coldGood — adequate for normal climates
Change intervalLonger (up to 10,000 km)Shorter (5,000–7,000 km typical)
PriceHigherLower
Oil filter
Spec: Not applicable — 2-stroke engine has no replaceable oil filter cartridge
  • OEM 2-stroke engine — no engine-oil filter to replace.
  • OEM Use the recommended 2-stroke oil grade listed above — clean oil is your only filtration.
Air filter
Spark plug
Spec: NGK B7HS, gap 0.7 mm
  • OEM NGK B7HS
  • Premium NGK BR7HIX
  • Standard NGK B7HS
Front brake pads
Rear brake pads
Drive chain
Spec: 102 links | Sprockets 14/40 teeth / 102 links
  • OEM OEM chain (pitch 520 (or 428 for some commuter 250s))
Front tire
Spec: 1.7 bar
Rear tire
Spec: 2.0 bar
Battery
  • Premium Yuasa YTX7L-BS or YTX7A-BS (typical 125-250cc)
Brake fluid
Spec: DOT 4
  • Standard TotalEnergies HBF4
Coolant
Service interval
Spec: 3 000 km / 12 months
  • OEM Engine oil + oil filter change
  • OEM Air filter inspection
  • OEM Spark plug check
  • OEM Brake fluid replacement: every 2 years
Valve check
Spec: Not applicable — 2-stroke engine has no valves
  • OEM 2-stroke engine — no valve clearance to inspect.
  • OEM Inspect piston, rings and cylinder at engine rebuild intervals (~30–50 hours for race, longer for street).
  • OEM Check exhaust power-valve operation (if equipped) every 20–30 service hours.
Suspension
Spec: telescopic fork / 125 ml 10W-30
  • OEM Fork: telescopic fork
  • OEM Fork oil grade: 125 ml 10W-30