Bike Specs

Kawasaki KLF 250 BAYOU (2003) — Specs

Kawasaki KLF 250 BAYOU

Identity

Manufacturer: Kawasaki
Model: KLF 250 BAYOU
Category: ATV/Quad
Type: ATV/Quad
Years: 2003 →

Engine

Displacement (cc): 228
Cylinders: 1
Power (hp): 17
Power (kW): 13

Dimensions

Dimensions
Overall length: 2070 mm
Overall width: 770 mm
Overall height: 1130 mm
Wheelbase: 1395 mm
Ground clearance: 155 mm
Tank (L): 10

Tires

Front pressure (bar): 0.21
Rear pressure (bar): 0.21

Ignition

Spark plug: NGK DR8ES
Plug gap: 0.6-0.7 mm

Fluids & Filters

Engine oil: SAE10W-40
Engine oil (with filter, L): 2.1
Oil filter: OEM oil filter
Air filter: OEM air filter

Fuel consumption

Estimated range: ~333 km on a full tank (10.0 L)

Service

Battery: OEM battery specification
Service interval (km): 6000
Service interval (months): 12
Valve check (km): 12000

Parts and consumables for this motorcycle

Data is gathered with care, but without guarantee. Always confirm critical information with your dealer or workshop.

Service notes

Service interval: every 6,000 km or 12 months, whichever comes first. Valve clearance check every 12,000 km. Valve clearance — intake cold 0.15-0.20 mm, exhaust cold 0.18-0.23 mm. Engine oil: oil grade SAE10W-40, 2.1 L with filter change. Spark plug: NGK DR8ES (gap 0.6-0.7 mm). Tire pressure: front 0.21 bar, rear 0.21 bar (cold). Always confirm critical values with the workshop manual or an authorised dealer.

OEM and quality aftermarket parts that fit this bike. Always confirm with your dealer before ordering.

Engine oil
Spec: SAE10W-40, 2.1 L (with filter)
  • OEM OEM recommended engine oil (SAE 10W-40)
  • Premium Motul 7100
  • Premium Motul 5100
Which Motul for this bike?
Motul 7100 4T ✓Motul 5100 4T
ProductMotul 7100 4T — 100% fully syntheticMotul 5100 4T — semi-synthetic
Best forSport, Naked, Adventure (600cc+), trackStandard, Cruiser, Scooter, daily use
RPM protectionExcellent — ester base, stable under loadGood — for normal riding conditions
  • Standard Repsol Moto Racing 4T
  • Standard Elf Moto 4 Tech
Fully Synthetic vs Semi-Synthetic
Fully SyntheticSemi-Synthetic
Base oil100% chemical synthesis (ester or PAO)Mineral oil + synthetic additives
Heat resistanceExcellent — stable at extreme heat & RPMGood — suitable for normal temperatures
Cold startBetter — reaches engine faster when coldGood — adequate for normal climates
Change intervalLonger (up to 10,000 km)Shorter (5,000–7,000 km typical)
PriceHigherLower
Oil filter
Air filter
Spark plug
Spec: NGK DR8ES, gap 0.6-0.7 mm
  • OEM NGK DR8ES
  • Premium NGK DR8ESIX
  • Standard NGK DR8ES
Front brake pads
Rear brake pads
Front tire
Spec: 0.21 bar
Rear tire
Spec: 0.21 bar
Battery
  • Premium Yuasa YTX7L-BS or YTX7A-BS (typical 125-250cc)
Brake fluid
  • Standard TotalEnergies HBF4
Coolant
Service interval
Spec: 6 000 km / 12 months
  • OEM Engine oil + oil filter change
  • OEM Air filter inspection
  • OEM Spark plug check
  • OEM Brake fluid replacement: every 2 years
Valve check
Spec: 12 000 km
  • OEM Intake clearance: cold 0.15-0.20 mm
  • OEM Exhaust clearance: cold 0.18-0.23 mm
Drive chain