Husaberg FE 550 E (2004) — Specs
Identity
Manufacturer: Husaberg
Model: FE 550 E
Category: Motorcycle
Type: Motorcycle
Years: 2004 →
Engine
Displacement (cc): 549
Cylinders: 1
Power (hp): 58
Power (kW): 43
Dimensions
Overall length: 2150 mm
Overall width: 810 mm
Overall height: 1180 mm
Wheelbase: 1450 mm
Ground clearance: 155 mm
Weight (kg): 109
Seat height (mm): 930
Tank (L): 9
Tires
Front pressure (bar): 1.5
Rear pressure (bar): 2
Drivetrain
Drive chain: 520 chain
Sprockets (front / rear): 15 / 48
Ignition
Spark plug: NGK DCPR8E
Plug gap: 0.6 mm
Fluids & Filters
Engine oil: SAE10W-50
Engine oil (with filter, L): 1
Oil filter: Hiflofiltro HF155
Coolant (L): 1
Brake fluid: DOT 4
Fuel consumption
Estimated range: ~187 km on a full tank (9.0 L)
Service
Service interval (km): 6000
Service interval (months): 12
Valve check (km): 12000
Parts and consumables for this motorcycle
Data is gathered with care, but without guarantee. Always confirm critical information with your dealer or workshop.
Service notes
Service interval: every 6,000 km or 12 months, whichever comes first. Valve clearance check every 12,000 km. Valve clearance — intake 0.12 mm cold, exhaust 0.12 mm cold. Engine oil: oil grade SAE10W-50, 1 L with filter change. Spark plug: NGK DCPR8E (gap 0.6 mm). Brake fluid: DOT 4. Coolant capacity: 1 L. Chain: chain, sprockets 15/48 teeth. Tire pressure: front 1.5 bar, rear 2 bar (cold). Always confirm critical values with the workshop manual or an authorised dealer.
OEM and quality aftermarket parts that fit this bike. Always confirm with your dealer before ordering.
Engine oil
Spec: SAE10W-50, 1.0 L (with filter)
- OEM OEM recommended engine oil (SAE 10W-50)
- Premium Motul 7100 4T (100% Synthetic, Ester)
Fully Synthetic vs Semi-Synthetic
| Fully Synthetic | Semi-Synthetic | |
|---|---|---|
| Base oil | 100% chemical synthesis (ester or PAO) | Mineral oil + synthetic additives |
| Heat resistance | Excellent — stable at extreme heat & RPM | Good — suitable for normal temperatures |
| Cold start | Better — reaches engine faster when cold | Good — adequate for normal climates |
| Change interval | Longer (up to 10,000 km) | Shorter (5,000–7,000 km typical) |
| Price | Higher | Lower |
Oil filter
Spec: Hiflofiltro HF155
- Premium Hiflofiltro HF155
Spark plug
Spec: NGK DCPR8E, gap 0.6 mm
- OEM NGK DCPR8E
- Premium NGK DCPR8EIX
Front brake pads
Rear brake pads
Front tire
Spec: 1.5 bar
Rear tire
Spec: 2.0 bar
Brake fluid
Spec: DOT 4
Coolant
Spec: 1.00 L coolant capacity
Service interval
Spec: 6 000 km / 12 months
- OEM Engine oil + oil filter change
- OEM Air filter inspection
- OEM Spark plug check
- OEM Brake fluid replacement: every 2 years
Valve check
Spec: 12 000 km
- OEM Intake clearance: 0.12 mm cold
- OEM Exhaust clearance: 0.12 mm cold
Suspension
Spec: 48 mm USD fork / SAE 5W
- OEM Fork: 48 mm USD fork
- OEM Fork oil grade: SAE 5W
Air filter
Drive chain
Battery
- Premium Yuasa YTX12-BS or YTZ10S (typical 500-750cc)
